The Key Facets Of Boat Upholstery Before Setting On Water

upholstry
Are you looking to give a facelift to the interior of your boat? Are you in search of increased comfort zone when sleeping on board? Then these important guidelines on marine upholstery is just for you.

At first, when giving a facelift to a marine vessel, re-upholstering its interior or exterior is the best choice. Hire a professional marine upholsterer who has a vast experience in installing the best materials. Investing in marine upholstery can be brought to justice if you get hold of a reputed expert.

First take a look at the types of cushion foams available for your upholstery.
Basically, there are four types of materials that can be used as cushion foams:

Compressed polyester

It is a dense polyester batting that poses as an alternative to foam. Compressed polyester can get more compressed over time. Due to the dense format of polyester, it is mildew resistant and non-allergic. It can even be washed with water. Compared to foams, compressed polyester lacks the advantages of the former.

Polyurethane Foam

foam
Polyurethane foam is the cheapest of all. It has a medium firmness, and is the perfect material for seating and mattress applications. Be sure to cover the material with an engineered leather that is polished and water resistant. Additionally, it prevents mould and mildew growth which is common in coastal areas. It is a good idea to use Dunlop foams which are a branded form of the polyurethane type.

Open cell foam

foam
An open cell foam has pores all over that allow water and air to flow through easily. Open cell foams are comfortable and offer a cool seating cushion. They are formulated with an antimicrobial agent to prevent mould and mildew. It is a bit expensive, but you get what you pay for. When paired with an outdoor cushion fabric, it creates a maintenance free material no matter what the climatic condition is.


Closed cell

foam
Closed cell foams are also known as floating foams. It does not allow water to run through it thus, being a buoyant. Closed cell foam is great for floatation applications like floating cockpit cushions and life vests. It is also a good choice for commercial boat seating. A thin layer of closed cell foam is often glued to the bottom of other foam, which helps to create additional support.

Bear in mind that crossing the materials for your boat upholstery is crucial because they stand responsible for both aesthetic and safety.

Advertisements
Upholstery

Why Choose Lumbar Support Cushions?

Upholstery
For people who are suffering from lower back pain and wondering how to get rid of such annoying pain, opting for lumbar support cushions, orthopedic backrest and ergonomic chairs is often the best solution. There are different types of back support available in the market, so choose one according your requirement.

Adjustable back supports
These types of back supports are flexible and you can also adjust them easily depending on your comfort level and requirements. The back support system can be optimised to suit all regions of your back, thanks to the body-specific strap adjustments. The shell attached at the back of the chairs means that it does not take on the shape of the seat but conforms to the form of the user.

If there is no adjustment option, make sure that the support cushion gives you proper reinforcement through the curve of your back. It should be noted, however, that these types of supports may not prop you to the same degree when used in different chairs.

Moulded foam lumbar supports
These types of cushions come in various shapes and sizes and are made from Dunlop foams, which provide great support, durability & longevity, and excellent materials for upholstery projects. Lumbar support made from this material easily moulds to the shape of your body giving you the support you need, no matter which way your spinal curve is altered, you can be sure that this type of support cushion will certainly follow the direction of your spine and extend support to the required areas. Some cushions have the added benefit of being able to adjust with either a pump-up system or an adjustable insert.

Where to use a lumbar support cushion?
Lumbar support cushions are generally used on vehicle seats where minimal lumbar support is needed within the existing vehicle seat. A range of styles and designs are available in Sydney for the lumbar supports and are worth trialing within individual vehicles to ensure practicality and comfort.
upholstery
If the foam is of a low quality or does not fit into the seat, the driver can experience sciatic pain because he/she is sitting lopsided. Look for a cushion that does not take on the shape of the seat, rather that of the user.

Back pain may not be cured through lumbar support cushions but can definitely provide ample relief to the people suffering from chronic spinal disorders.

How To Understand The Firmness Of Memory Foam?

Memory Foam
The use of a memory foam mattress can provide you innumerable health perks. Unlike many other mattresses, this specific product incorporates technology invented by the renowned space organisation NASA. Taking a cue from NASA, the memory foam mattress adjusts itself to conform to the person’s bodyline. People with back aches and body pain can benefit a lot from memory foams. But before you consider to buy one, you must keep these important instructions in mind.

Understanding the firmness of memory foam
In most cases, the best way you have of understanding how firm memory foam will feel is by looking at the manufacturer’s rating. The main issue you’ll face is with the rating. This is because, mattress manufacturers do not need to follow a certain guide or test of firmness so that all mattresses have equal properties. This is a problem when trying to understand the differences of firmness in memory foam products. As people have different preferences of comfort, it is important that you don’t rely solely on the manufacturer’s rating. Instead check out the ILD to understand how soft or hard the mattress will feel.

What is ILD Rating and why is it important?
foam

ILD stands for Indentation Load Deflection. It’s simply a term used to measure how hard or soft a foam is. To get an accurate picture of firmness and quality, ILD is combined with density of a
foam mattress. Manufacturers calculate the ILD by measuring the amount of pressure in pounds that is needed to indent 25 percent into a memory foam layer of 4 inches. This is tested by using equal amounts of pressure on 50 square inches to press into the memory foam by 25 percent.

8 pounds of pressure is required to indent the softest memory foam by 25 percent, while 20 pounds of pressure is required to indent into extremely firm memory foam. For the majority of memory foam mattresses, the ILD rating is displayed between 10 – 12.

However, there can be a slight variation in the ILD rating based on where the foam was stored before testing or how it has been conditioned. Two of the factors that contribute to this slight variation are humidity and moisture.

Memory foams have a lot of advantages. This is why you must purchase the best product from the market considering the ILD rating.

foam

The Application Of Polyurethane Foam In Automotive Industry

Automotive Industry
Polyurethane foam is a material that is commonly used in the automotive industry of Sydney. However, despite its ubiquity, it’s also one of the most important materials in the modern world.

Here are some of the ways polyurethane foam is utilised in the manufacturing of vehicles.

Spoiler
foam

This accessory actually improves a vehicle’s aerodynamic properties, models with spoilers definitely looks sleeker than those without it. And without the use of polyurethane foam, spoilers wouldn’t look as awesome, as they wouldn’t have the same glossiness.

Seating
seat

The seats are the most visible parts of a car’s interior. And these cannot be achieved without PU foams. The seats won’t be as soft, comfortable, and shock-absorbing if made with any other material. The liquefied polyurethane mix is injected into a mould, which is held at a preset temperature. It stays there until the liquid foams, fills the mould, and forms a soft but sturdy foam.

Bumper
foam

Imagine a car without a bumper. Looks kind of incomplete and totally uncool. Thanks to PU foam, which is also an essential ingredient for bumpers, cars are a lot safer to drive since they can absorb most of the shocks in case of a collision.

Body
foam

In a car or any other vehicle, the engine is the hottest and noisiest part. In fact, it can reach temperatures so high and make noises so unbearably that people sometimes wonder how driver and passengers can remain comfortable inside the vehicle. This is where PU foam does its wonders. It is integrated with the car’s metal framework, making the interior almost immune to the external factors of heat and noise.

Energy Absorbers
foam

In some cases, it has been seen that people miraculously survive disastrous accidents. Do you know why? That’s the work of energy absorbers. These small but important compartments create crumple zones at the ends of the vehicle, decreasing the impact of collisions. Obviously, they are made up of polyurethane foam as that material can take tremendous pressure.

Coating
coating.jpg

The first thing people usually notice in a car is it’s aesthetics. And it’s not enough that the outside is shiny and smooth; it also has to be durable and resistant to scratches and corrosion. Whether it’s the paint job or the hardness against damage, polyurethane has both the properties.

The properties of polyurethane foam has made itself one of the best choices in automotive industries. Actually there is no end to the availability of choices, car manufacturers automatically have an urge to use this specialised material.

How To Find A Foam Upholsterer?

upholstrteeey
Is it time for a new foam upholstery project? Find a reputed professional to make it quicker and to achieve a top quality. How would you find a good upholsterer? Who is a good upholsterer?
It takes work to find a good tradesman in any profession. Finding a good upholsterer is no different.
If a professional has been in business for many years, there must be a reason why he/she is still in the game. That is one good sign.

The Upholstery Trade
Upholstery is one trade that allows all levels of competence to find work. Rank amateurs to qualified professionals, all have a place. Each skill level of upholsterer can find work from a corresponding type of client. The main problem is when any level or type of upholsterer is not truthful about the quality of their workmanship. However, with that said, it is not unusual for an upholsterer to think that he does better work than he actually does.

The services of upholsterers are as varied as the clients seeking upholstery work. Some clients have furniture where the fabric is completely worn, that has the cotton hanging out in a number of different places. Some of these clients just want some new foam on the furniture, and they don’t want to pay very much. They don’t care much about how good the work is, they just want a new cover and spend less for it. Other clients have high quality antiques, or sentimental furniture and they want and expect high quality workmanship, and are willing to pay more to get what they want. And there is a whole spectrum of clients between those.

If an upholsterer claims to be “the best” and brags about their workmanship, then be careful. Those who claim to be the best seldom are. Often times those who boast are trying to cover up their lack of ability. An upholsterer who does good quality work doesn’t have to brag. Their work speaks for itself.

Skill takes years to acquire, although the time to learn can be dramatically lowered if a person is apprenticed to a qualified professional who is also a good teacher.

Upholsterers have various skill levels in a variety of specialties. Some may have lots of experience in one area, but very little in another area.

Expectations
Most upholsterers have ways of doing things that are common. Also, various upholsterers in Sydney use different supplies. Don’t take anything for granted. If you want certain supplies used, or if you want something special done, clearly explain, or better yet, explain it in writing and make drawings. Go on the Internet and find pictures of what you want.

Get your upholstery job done easily by hiring a foam upholsterer who can make the same in a professional way that stays for a prolonged period.

Outdoor Upholstery Sydney

Here’s How You Can Clean Upholstery Using A Steam Cleaner

Steam cleaning can do more than removing just visible dirt from upholstery – it can eliminate embedded stains, kill microbes, sanitise the surface and remove grease. Here is a brief guide to help you do it on your own.

Memory Foam Mattresses – A Buyer’s Guide

memory foam
Before you start, do you know what memory foam mattress is?

It is a cutting edge, engineered form of PU (polyurethane) foam. Memory foam mattresses are made from millions of open cells that are sphere shaped. The special design of these cells makes them responsive to both body pressure points and temperature. Thus, the material is able to contour itself against the shape of your body, giving the perfect support where required. The open cell design of the mattresses allow air to pass through the material freely, which helps to keep it, and the person cool, preventing excessive sweating.

What Should You Look For When You Purchasing A Foam Mattress

When you plan to purchase a high quality foam mattress, you should look after these three important factors: Firmness Rating, ILD Rating and Density. These three ratings determine how efficient the material is.

The Size Of The Mattress

size.jpg
Do you know that a majority of people spend a significant time of their life lying in bed? Thus, it makes sense in buying an expensive mattresses. It is important that you purchase a high rated mattress in regards to the size of your bedroom, bed and budget.

Suitability Of Your Bed For A Memory Foam Mattress

kid-memory-foam-mattress
Most mattresses can be used on all bedsteads and bases, but some can help to perform better and feel more comfortable compared to others. For instance, if you have a bedstead or bed with a slatted wooden base, it is recommended to use slats not more than 2 to 3 inches apart. The majority of foam mattresses in the market today are also suitable for box or divan type of bed. This means, just a stable and solid platform is the best foundation for a mattress.

Why The Depth Of A Mattress Is Important

affinity-layer
Although the depth is important, the most important aspect of a memory foam mattress in terms of depth is how deep the actual foam layer is, as this determines how well it relieves pressure points, supports your body and provides you with a comfortable sleep.

Understanding The Density Of Memory Foam

memory foam
Remember, the rating of a foam mattress refers to the top layer of the memory beds density, not the full mattress. The supporting base of a mattress uses impact resistant or high resilience polyurethane foam. It is important that you never mistake this while purchasing a memory foam.

Gone are the days when spring mattresses were considered to be the best. It is the world of memory foam. So, enjoy more comfort.